Tork Craft | Flap Disc Zirconium 115mm 80G Angled
115mm Flap Disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.
- Size: Ø115
- Grit: P80
- Surface: 15° conical
- Apply light pressure when finishing welds
- The flap disc is flexible and will tend to follow the contours of whatever you are grinding
Grit recommendation
| Grit | Materials |
| 24-40 | Aluminium, soft non ferrous metals, wood and plastic |
| 36-50 | Unalloyed or low alloyed steels, and low tensile strength stainless steels |
| 60 | High-alloyed, stainless and tempering steels |
| 80 | High-alloyed steels and fine finish on all metals |
| 120 | For extra fine finish on all materials |
Specifications
| Description | Value |
| Size Ø | 115mm |
| Grit | P80 |
| Bore | 22.23mm |
| Max RPM | 13,300rpm |
| Bevel | 15° |
To extend the service life on a flap disc, lower the speed to half of the MAX rpm rated on the disc. This could extend the service life almost 100%. This can be accomplished by using a variable speed angle grinder.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Tork Craft | Flap Disc Zirconium 115mm 80G Angled
Tork Craft | Flap Disc Zirconium 115mm 80G Angled
115mm Flap Disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.
- Size: Ø115
- Grit: P80
- Surface: 15° conical
- Apply light pressure when finishing welds
- The flap disc is flexible and will tend to follow the contours of whatever you are grinding
Grit recommendation
| Grit | Materials |
| 24-40 | Aluminium, soft non ferrous metals, wood and plastic |
| 36-50 | Unalloyed or low alloyed steels, and low tensile strength stainless steels |
| 60 | High-alloyed, stainless and tempering steels |
| 80 | High-alloyed steels and fine finish on all metals |
| 120 | For extra fine finish on all materials |
Specifications
| Description | Value |
| Size Ø | 115mm |
| Grit | P80 |
| Bore | 22.23mm |
| Max RPM | 13,300rpm |
| Bevel | 15° |
To extend the service life on a flap disc, lower the speed to half of the MAX rpm rated on the disc. This could extend the service life almost 100%. This can be accomplished by using a variable speed angle grinder.
Original: $2.31
-70%$2.31
$0.69Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
115mm Flap Disc
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and finish in one operation.
- Size: Ø115
- Grit: P80
- Surface: 15° conical
- Apply light pressure when finishing welds
- The flap disc is flexible and will tend to follow the contours of whatever you are grinding
Grit recommendation
| Grit | Materials |
| 24-40 | Aluminium, soft non ferrous metals, wood and plastic |
| 36-50 | Unalloyed or low alloyed steels, and low tensile strength stainless steels |
| 60 | High-alloyed, stainless and tempering steels |
| 80 | High-alloyed steels and fine finish on all metals |
| 120 | For extra fine finish on all materials |
Specifications
| Description | Value |
| Size Ø | 115mm |
| Grit | P80 |
| Bore | 22.23mm |
| Max RPM | 13,300rpm |
| Bevel | 15° |
To extend the service life on a flap disc, lower the speed to half of the MAX rpm rated on the disc. This could extend the service life almost 100%. This can be accomplished by using a variable speed angle grinder.
