Tork Craft | Plug Cutter Set 5Pc 6, 8, 10, 12 & 16mm
Plug cutters
A plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø6, 8, 10, 12, 16mm
SHANK: Ø6mm
MATERIAL: Hardened steel
Application:
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth. A band saw can then be used to remove the plugs from the offcut.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Tork Craft | Plug Cutter Set 5Pc 6, 8, 10, 12 & 16mm
Tork Craft | Plug Cutter Set 5Pc 6, 8, 10, 12 & 16mm
Plug cutters
A plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø6, 8, 10, 12, 16mm
SHANK: Ø6mm
MATERIAL: Hardened steel
Application:
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth. A band saw can then be used to remove the plugs from the offcut.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Plug cutters
A plug cutter is used to make a timber plug to hide a drilled hole.
INSIDE DIAMETER: Ø6, 8, 10, 12, 16mm
SHANK: Ø6mm
MATERIAL: Hardened steel
Application:
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
The benefits of using plug cutters:
- The same wood can be used to match with the current timber.
- The grains can be alligned to hide the plug even better.
- Excess offcut timber can be used to drill the plugs.
- Plug cutters can be used to hide imperfections in wood
TIP:
For best results, use a drill press to cut all the plugs to the required depth. A band saw can then be used to remove the plugs from the offcut.
